Manual Reset MP145

Service mode operation procedures -

1) With the printer powered off but connected to a power source, press the
Power button while pressing and holding

the Stop/ Reset button.

2) When the Power LED is lit, press the Stop/Reset button two times while
pressing and holding the Power button.

3) When releasing the Power button and the Stop / Reset button (regardless of
order), the printer will move into a

service mode. (Waiting for menu selection)

4) When the LED lights in green, press the Stop/Reset button the specified
number of time(s) according to the

function listed in the table below.(Each time the Stop/Reset button is pressed,
the LED lights alternately in

orange and green, starting with orange.)

The number of the Reset

button pressing

LED Function Remarks

0 time Green Power off

1 time Orange Service pattern print

2 times Green EEPROM print

3 times Orange EEPROM reset

4 times Green Waste ink counter reset See waste ink counter reset

procedures below.

5 times Orange Destination setting See Destination setting

procedures below.

6 times Green Print head deep cleaning

11 times Orange Button / LCD checking

12 or more times Returns to a menu selection 

0 komentar:

Poskan Komentar

Copyright © Share Your Knowledge